Connector to Cable UHV assemblies are fitted with PEEK Subminiature-D connectors with strain relief at one end and non-terminated ceramic insulated cable at the other.  The female socket connectors mate directly onto the vacuum-side of corresponding feedthroughs.  Thermocouple cable assemblies have gold-plated female socket contacts at one end and 18 or 38 inches of "Extension Grade" wire and 1 inch of non-terminated ceramic insulated 30AWG (Type-R/S) Platinum-(13% or 10%) Rodium+ and Platinum - solid wires at the opposite end.  Power cable assemblies have gold-plated female socket contacts at one end and non-terminated Kapton insulated 12 AWG multi-strand wire at the other end.  Female socket contacts mate with 0.040 diameter male pins, and power female socket contacts mate with 0.142 diameter male pins.  Both male pins are standard on our thermocouple feedthroughs.

 

  Contact to Cable UHV leads are fitted with ceramic insulators but do not include PEEK connectors.  Special note:  Individual contact fitted leads will not allow subsequent connector installation of the two power and two thermocouple pair PEEK connector.

 

  Connector to User-Specified "Hot Junction" are additions to Connector to Cable or Contact to Cable assemblies and may be selected from the "Detail" page of the assemblies listed below.  Click on the photo or title to access the "Detail" page.