(661) 607-0250
HomeBreaks / IsolatorsFluid Breaks

Vacuum Fluid Breaks

Copper and Ceramic Water Breaks with an Outer Diameter of 1/4"

Water Break - 0.250 OD

Part Number: 111180

Water Break 1/4 inch, Copper and Ceramic. 3.00" inches long.

$335.00
Copper and Ceramic Water Breaks with an Outer Diameter of 3/8"

Water Break - 0.375 OD

Part Number: 111181

Water Break 3/8 inch, Copper and Ceramic. 3.00" inches long.

$345.00
Copper and Ceramic Water Breaks with an Outer Diameter of 1/2"

Water Break - 0.500 OD

Part Number: 111182

Water Break 1/2 inch, Copper and Ceramic. 3.00" inches long.

$373.00
placeholder image

Diagram of copper ceramic fluid break

Water, Liquid and Fluid Breaks

Water breaks are designed for the transmission of water and/or coolant fluids. These components are rated for a maximum line pressure of 75 psig. A maximum thermal gradient of 25ºC per minute across the break must be observed to prevent seal damage. During installation, brazing or soldering temperatures must not exceed 700ºC.