Zero-Length Reducer CF Flanges

Zero-Length Reducer Flanges - Conflat CF - Ultrahigh (UHV) In-Vacuum

2.75" to 1.33" CF Conflat® Zero Length Reducer Flange

Part Number: 200301

2.75" to 1.33" CF Conflat® zero length reducer flange.

$137.00

Quantity

4.5" to 1.33" CF Zero Length Reducer Flange with Bolt Holes and a 0.75" Inner Diameter Through Hole in the Center of the Flange

4.50" to 1.33" CF Conflat® Zero Length Reducer Flange

Part Number: 200307

4.50" to 1.33" CF Conflat® zero length reducer flange.

$174.00

Quantity

4.5" to 2.75" CF Zero Length Reducer Flange with Bolt Holes and a 1.5" Inner Diameter Through Hole in the Center of the Flange

4.50" to 2.75" CF Conflat® Zero Length Reducer Flange

Part Number: 200309

4.50" to 2.75" CF Conflat® zero length reducer flange.

$221.00

Quantity

6" to 2.75" CF Zero Length Reducer Flange with Bolt Holes and a 1.5" Inner Diameter Through Hole in the Center of the Flange

6.00" to 2.75" CF Conflat® Zero Length Reducer Flange

Part Number: 200317

6.00" to 2.75" CF Conflat® zero length reducer flange.

$253.00

Quantity

6.00" to 4.50" CF Conflat® Zero Length Reducer Flange

Part Number: 200319

6.00" to 4.50" CF Conflat® zero length reducer flange.

$340.00

Quantity

6.00" to 4.50" CF Conflat® Zero Length Reducer Flange - Tapped

Part Number: 200320

6.00" to 4.50" CF Conflat® zero length reducer flange with both large and small flanges with tapped bolt holes.

$340.00

Quantity

10" to 8" CF Zero Length Reducer Flange with Bolt Holes and a 6" Inner Diameter Through Hole in the Center of the Flange

10.00" to 8.00" CF Conflat® Zero Length Reducer Flange

Part Number: 200347

10.00" to 8.00" CF Conflat® zero length reducer flange.

$718.00

Quantity

Zero-Length Reducer Flange

Zero-Length Reducer Conflat CF Flanges - Ultrahigh (UHV) In-Vacuum

Below you will find a selection of Conflat CF flanged Zero Length reducers. If you do not see the reducer you are looking for, please send us an email or call.

Ultrahigh (UHV) In-Vacuum Zero Length Reducer Flanges are generally used when you want to go from a large cf flange size to a smaller CF flange size. The smaller sized flange has blind tapped holes while the larger (most) have through holes. Where the two flanges have similar diameters, both are tapped and are noted as such.

Rated to 1x10-10 Torr and 250 C.