HomeMotion and ManipulationRotary FeedthroughsRotary, Elastomer Sealed

Elastomer Sealed Rotary Feedthroughs

Rotary Feedthroughs / Elastomer Sealed Shaft

The ORR series 'elastomer sealed' rotary motion feedthrough is an economical alternative to our bellows sealed devices. They are ideally suited for less critical applications in the high vacuum regime.

They are constructed of black-anodized aluminum and stainless steel. In vacuum bearings are dry-film lubricated with tungsten-disulfide, while air side bearings are lubricated with high-temperature Krytox® lubricant. The rotation shaft is sealed with a Viton® elastomer O-ring located at end opposite vacuum mounting flange.

Standard rotary feedthroughs are fitted with a manual actuator, and are also available with an air-side shaft extension for added drive flexibility.

These rotary feedthroughs are available on Conflat® compatible CF style metal seal or ISO-KF elastomer seal flanges.

Features

  • Economical alternative to bellows seal
  • High temperature rated to 150°C
  • HV compatible construction
  • Conflat® and ISO compatible mounts
  • Manual actuator
  • Continuous 360° rotary motion
  • Viton® elastomer shaft seal
  • Custom solutions on request

Specifications

Material 
Body, Stainless Steel304
Actuator, Anodized Aluminum2011
Shaft Seal, ElastomerViton®
Vacuum Range 
HV, High vacuum1x10E-8 Torr
Temperature Range 1 
Feedthrough150°C
Flange, Conflat®450°C
Flange, ISO150°C
Load 
Axial, Maximum5 lb
Lateral, Maximum 25 lb
Resolution 
Rotary ScaleNone
Notes 
  1. Overall assembly ratings must be adjusted to that of its lowest rated component. For cryogenic service, the lowest recommended temperature is -80°C
  2. With load positioned 2-Inches from flange sealing face