Air Connectors / Cables - Subminiature-C (Sub-C)







Contacts, Type-T1 High Duty Cycle / Female
Part Number: | 110908 |
Wire Acceptance: | 20-24 AWG |
View Product







Air Connectors and Cables - Subminiature-C (Sub-C)
Connector to Cable assemblies are fitted with a Delrin® polymer 9-pin Sub-C female connector on one end, and non-terminated nine (9) PVC insulated wires / cables at the other. The 9-pin female connector mates directly to the air-side of our subminiature-C feedthroughs.
Air Service Connectors are made from a Delrin® polymer material and use either of the contacts listed below. Caution: Wires must be threaded through the connector back-piece before crimping contacts. Crimped contacts WILL NOT fit through back-piece holes.
Standard Contacts are made from a copper alloy and gold plated. They're recommended for use in our subminiature-C and subminiature-D vacuum and air-service connector products.
High Duty Cycle Contacts are standard contacts that have been reinforced with a stainless steel sleeve, which extends the contact's spring life. They're used in place of our standard contacts in applications requiring frequent and/or excessive plug/unplug cycles (3 or more cycles per day).