UHV Round Cables for In Vacuum use





Subminiature-C Vacuum Round Cable Assemblies
Connector to Cable Vacuum assemblies are fitted with PEEK subminiature-C female or male connectors at one end, and nine, non-terminated, color coded Kapton insulated wires at the other. The female cable connectors mate directly onto the vacuum-side of subminiature-C UHV feedthroughs, sub-c HV feedthroughs, or with male in-vacuum cable connectors. The cable jacket is a PEEK braid with a nominal diameter of 0.14 inches. The nine wires are Kapton® insulated 28 AWG silver plated copper conductors, stranded 7 x 0.005.
Connector to Connector Extension Cables are fitted with PEEK subminiature-C female connectors on both ends of a 19-inch UHV Ultra-High Vacuum round cable.
Contact to Cable UHV round cable assemblies include crimped male or female contacts on one end, and nine, non-terminated, Kapton insulated leads at the other.
Caution: 'contact to cable' assemblies do not include PEEK connectors and will not allow subsequent connector installation, as wires must be threaded through connector back-piece before crimping contacts.
UHV Subminiature-C (Sub-C) Cable Specifications
- Subminiaure-C 9-pin interface
- High temperature rated to 250ºC (Feedthrough)
- UHV compatible construction
- PEEK connectors with locking screws
- Voltage rating: 500 VDC max.
- 5 AMPs per pin (20% of pins at any given time)
- Pins: Au plated, Ni-Fe alloy
- UHV rated 1x10-10 Torr