HomeComponentsAdhesive Tape

Kapton Tape

Kapton® Tape - Acrylic 3/4" Wide

Kapton® Tape - Acrylic 3/4" Wide

Part Number: 111206

Kapton® tape, 3/4" wide, 0.0025 inch thick, with acrylic adhesive. 36 yards long.

$107.00
Kapton® Tape - Acrylic 1" Wide

Kapton® Tape - Acrylic 1" Wide

Part Number: 110790
Kapton® tape, 1" wide, 0.0025 inch thick, with acrylic adhesive.
36 yards long.
 
$138.00
Kapton® Tape - Acrylic 2" Wide

Kapton® Tape - Acrylic 2" Wide

Part Number: 111207

Kapton® tape, 2" wide, 0.0025 inch thick, with acrylic adhesive. 36 yards long.

$265.00
Kapton® Tape - Silicone 1" Wide

Kapton® Tape - Silicone 1" Wide

Part Number: 110793

Kapton® tape, 1" wide, 0.0035 inch thick, with silicone adhesive. 36 yards long.

$192.00
Kapton® Tape - Silicone 2" Wide

Kapton® Tape - Silicone 2" Wide

Part Number: 111202

Kapton® tape, 2" wide, 0.0035 inch thick, with silicone adhesive. 36 yards long.

$382.00
Kapton® Tape - Silicone 4" Wide

Kapton® Tape - Silicone 4" Wide

Part Number: 111203

Kapton® tape, 4" wide, 0.0035 inch thick, with silicone adhesive. 36 yards long.

$755.00
Kapton® Tape - Silicone 6" Wide

Kapton® Tape - Silicone 6" Wide

Part Number: 111204

Kapton® tape, 6" wide, 0.0035 inch thick, with silicone adhesive. 36 yards long.

$1,093.00
HV High In-Vacuum Kapton Tape Adhesive, Drawing

Three pairs of Kapton acrylic tape on top of each other

Kapton Adhesive Tape

AGP’s Kapton adhesive tapes provide clean, flexible electrical insulation with low outgassing characteristics. Kapton is a high performance, reliability and durability film, with a unique combination of electrical, thermal, chemical, and mechanical properties that are ideally suited for extreme temperature, vibration and other demanding environments. Kapton tape has a dielectric strength of 7000 volts/.001-Inch-thickness and a tensile strength of 30 lbs./inch-width and ideal for use inside High Vacuum (HV) environments to a pressure of 1x10E-8 Torr.  Our Kapton tapes are available with acrylic, and silicone-based adhesives, in single- or double-sided configurations. Standard Kapton tape widths include .25, .38, .50, .75, 1.0, and 2.0 inches. 

Additionally, silicone based adhesive tapes are also offered in wider 4.0, and 6.0 inch widths. Please note that our double-sided tapes are only available in .25, .50, .75, and 1.0 inch widths. Acrylic Kapton adhesive tapes are rated for use between -30 to 175°C maximum, and an adhesion to steel rating of 30 oz per Inch of width. Silicone adhesive Kapton tape has a slightly better temperature rating of -40° to 260°C maximum, and an adhesion to steel rating of 25 oz per Inch of width.