Microdot, Grounded Shield - NW16 KF Flange
Single ended, grounded shield, Microdot feedthrough mounted on a NW16 KF flange.
Single ended, grounded shield, Microdot feedthrough mounted on a NW16 KF flange.
Single ended, grounded shield, Microdot feedthrough mounted on a NW40 KF flange.
Grounded shield, Microdot to BNC feedthrough mounted on a NW16 KF flange.
Grounded shield, Microdot to BNC feedthrough mounted on a NW40 KF flange.
The Microdot ® coaxial interface, developed for aerospace and instrumentation applications, is a small circular connector, which is sometimes mistaken for the slightly larger SMA coaxial connection. In its most common configuration, the S-50 series (the feedthroughs offered herein), it uses a No. 10-32 UNF (.190-32) thread. Male connectors are fitted with a .030/.033 diameter pin and jacks have the female mating socket receptacle. It is commonly used in conjunction with high-frequency, low noise, 50-ohm instrumentation signal lines in accelerometers, and various transducer applications. Accu-Glass Products' Microdot ® and 'between-series' BNC-Microdot ® coaxial feedthroughs are constructed with grounded shields, where the feedthrough shield and flange are electrically common.
BNC-Microdot ® 'between-series' feedthroughs offer a simple means of transitioning between BNC and Microdot ® wired applications, or vise versa. The BNC-Microdot ® feedthrough is often used in conjunction with crystal sensors to monitor deposition thicknesses of in-vacuum coating applications. Microdot ® cable assemblies, connectors, and wiring accessories are also offered. Threaded, mating male and female, coaxial connectors are available.
Warning — SMAs, with .250-36 thread and .035/.037 pin diameter, are often mistaken for Microdot S-93, connectors with .250-32 threads and .030/.033 pins. To avoid possible damage to one or both connector interfaces, these connectors should never be cross-mated. Compare Microdot ® and SMA differences below...
Electrical | |
Voltage 1, Maximum | 500 VDC |
Current, Max @ 20°C | 2 A |
Material | |
Shell | 304 Ss |
Pin, Ni-Plated | Ss / Mo |
Insulation, Ceramic | Alumina |
Connector, Vacuum 2 | |
BNC, Ni-Plated | Brass / PEEK |
Microdot, Au-Plated | Brass / PEEK |
Cable Insulation | Kapton® |
Connector, Air | Composite |
Vacuum Range | |
UHV, Ultrahigh vacuum | 1x10E-10 Torr |
HV, High vacuum | 1x10E-8 Torr |
Temperature Range3 | |
Feedthrough, Single Ended | 250°C |
Flange, Conflat® | 450°C |
Flange, ISO | 150°C |
Connector / Cable, Air | 165°C |
Connector / Cable, UHV | 250°C |
Thermal Gradient, Maximum | 25°C/minute |
Notes |