
Motion and Manipulation for Ultrahigh (UHV) High In-Vacuum (HV) applications
AGP offers a line of Linear, Push-Pull, Wobble Sticks, and Rotary feedthroughs designed to meet the demands of motion and manipulation in ultrahigh (UHV) and high in-vacuum (HV) environments.
Manufactured with stainless steel bearings (we never use bushings that can wear out) and sealed using AM-350 edge-welded bellows, our linear and rotary feedthroughs are the most reliable and robust available anywhere.
The links above provide access to our line of Linear and Rotary feedthroughs as well as our stepper motor and pneumatic actuator options.
Please refer to each category below for complete specifications.
Motion and Manipulation Feedthrough Material SpecificationsMaterial | |
---|
- Internal Body
- Housing
- Bellows
- Elastomer Sealed Shaft Rotary Products
- Other Products
| 304 Stainless Steel Anodized Aluminum 2011 Edge-Welded AM-350 See that Category Main Page See that Category Main Page
|
Motion and Manipulation Vacuum Range SpecificationsVacuum Range | |
---|
- UHV, Ultrahigh vacuum
- HV, High vacuum
| 1x10-10 Torr 1x10-8 Torr |
Motion and Manipulation Temperature Range SpecificationsTemperature Range | |
---|
- Feedthrough
- Flange Mount, Conflat
- Flange Mount, ISO
| 250ºC 450ºC 150ºC
|
* Overall assembly ratings must be adjusted to that of the lowest-rated component. | |
Motion and Manipulation, Other SpecificationsLoad, Resolution, and Speed | |
---|
- Axial, Maximum
- Lateral, Maximum at 2 inches from flange face
- Rotary Products only, Torque
- Rotary Products only, Axial
- Rotary Products only, Lateral
| 5 lb 5 lb 250 in-oz maximum 6 lb maximum 10 maximum
|
- Linear Scale
- Rotary Scale
- Rotary Products only, Rotary Scale
| 0.025 Inch 0.001 Inch 5º |
- Rotary Products only, Speed
| 1,000 RPM Maximum |