1 Coax, 4 Instrumentation Feedthrough on a 2.75" CF Flange
Part Number: 100500
1 Coaxial + 4 Instrumentation pin Feedthrough on a 275" CF Flange.
$394.00
Subminiature-D Coaxial CF Feedthrough Flanges
3-Coax Feedthrough on a 4.50" CF Flange
Part Number: 100510
3 Coaxial Feedthroughs on a 4.50" CF Flange.
$501.00
5-Coax Feedthrough on a 4.50" CF Flange
Part Number: 100520
5 Coaxial Feedthroughs on a 4.50" CF Flange.
$528.00
6 Coaxial Feedthroughs on a 4.50" CF Flange
Part Number: 100512
6 Coaxial Feedthroughs (3 pin x 2) on a 4.50" CF Flange.
$949.00
10 Coax Feedthrough on a 4.50" CF Flange
Part Number: 100522
10 Coaxial Feedthroughs (5 pin X 2) on a 4.50" CF Flange.
$975.00
Coax-D™ Feedthroughs and Accessories
Coaxial hermetic Subminiature-D feedthroughs with coaxial pin and shield are available in 1, 3 and 5 pin configurations mounted in standard 9D, 15D, and 25D shell sizes, respectively.
The coaxial shield floats with respect to ground providing a secondary electrical path. The single pin coax-D feedthrough also includes four non-shielded instrumentation pins for added connection capability. Gold plated pins and shields are in a straight through pin-to-pin design, are hermetically sealed and electrically insulated in a stainless steel shell using the latest in glass-ceramic bonding technology.
Ultrahigh vacuum cable assemblies with PEEK (polyetheretherketone) connectors and Kapton® insulated 50-Ohm coaxial cables are available to meet the demands of UHV environments. The connection accessories must be purchased separately. Vacuum side cable assemblies, individual connectors and other accessories can be found from the links below. Custom sub-D coaxial feedthrough products are available on request.
Features
- 1, 3 and 5 Subminiature-D interface
- Floating Shield Design
- Kapton® insulated 50-Ohm cable
- High temperature rated to 250°C
- UHV compatible construction
- Conflat® and ISO compatible mounts
- PEEK Connector with Locking Screws
- Air service cables / connectors
- Custom solutions on request
Specifications
| Electrical | |
| Voltage 1, Maximum | 500 VDC |
| Current 2, Maximum | 5 A |
| Material | |
| Shell, Stainless Steel | 304 |
| Coaxial Shield | Ni-Fe |
| Pins, Au plated | Ni-Fe |
| Seal / Insulator | Glass-Ceramic |
| Connectors, Vacuum 3 | |
| Subminiature-D | PEEK |
| BNC | PEEK, Brass |
| SMA | PEEK, Brass |
| User-End | PEEK, BeCu |
| Connector, Air | Composite |
| Cable Insulation | Kapton® |
| Vacuum Range 4 | |
| UHV, Ultrahigh vacuum | 1x10E-10 Torr |
| HV, High vacuum | 1x10E-8 Torr |
| Temperature Range | |
| Feedthrough | 250°C |
| Flange, Conflat® | 450°C |
| Flange, ISO | 150°C |
| Connector / Cable, Air | 80°C |
| Connector / Cable, UHV PEEK | 250°C |
| Thermal Gradient, Maximum | 25°C/minute |
| Notes |
- Electrical ratings are maximum test values, with feedthrough's vacuum side at ≤ 1x10E-4 Torr. Feedthroughs are intended for instrumentation applications carrying low level signal voltage and current.
- For proper heat dissipation, a maximum of 20% of the pins on a feedthrough may carry the maximum pin current at any given time.
- PEEK is a polyether ether ketone thermoplastic.
- Overall assembly ratings must be adjusted to that of its lowest rated component.