HomeCoaxialSubminiature Coax-DISO KF/ LF Feedthroughs

Coax-D ISO Feedthroughs

Subminiature Coax-D™ ISO NW Feedthroughs

Accu-Glass Coax-D™, floating shield coaxial feedthroughs are available in 1, 3, and 5 pin coaxial configurations that are sealed into standard size 9, 15 and 25 Subminiature-D shells respectively. Feedthroughs are mounted on Conflat® compatible CF or ISO flanges for UHV and high vacuum service.
The electrical shields on these coaxial feedthroughs 'float' relative to ground, thus providing a secondary and concentric electrical path around each conductor pin. Single-pin coaxial feedthroughs also include four (4), non-shielded, instrumentation pins for added connectivity options. Gold plated conductor pins and shields are constructed in straight-through pin-to-pin design. Pins and shield are electrically insulated and hermetically sealed to the stainless steel Subminiature-D shells using the latest in glass-ceramic and metal bonding technology.
Ultrahigh vacuum cable assemblies fitted with PEEK polymer connectors and Kapton® insulated 50-Ohm coaxial cable are available to meet the rigorous demands of UHV vacuum environments. Connectivity accessories are also available and sold separately. Vacuum and air-side cable assemblies, individual connectors and other accessories begin on page 58. Custom Coax-D™ Subminiature-D coaxial solutions are available on request.

Glow Discharge Graph

Features

  • 1, 3 and 5 Subminiature-D interface
  • Floating Shield Design
  • Kapton® insulated 50-Ohm cable
  • High temperature rated to 250°C
  • UHV compatible construction
  • Conflat® and ISO compatible mounts
  • PEEK Connector with Locking Screws
  • Air service cables / connectors
  • Custom solutions on request
     

Specifications

Electrical 
Voltage 1, Maximum500 VDC
Current 2, Maximum5 A
Material 
Shell, Stainless Steel304
Coaxial ShieldNi-Fe
Pins, Au platedNi-Fe
Seal / InsulatorGlass-Ceramic
Connector, Vacuum 3 
Subminiature-DPEEK
BNCPEEK, Brass
SMAPEEK, Brass
User-EndPEEK, BeCu
Connector, AirComposite
Cable InsulationKapton®
Vacuum Range 4 
UHV, Ultrahigh vacuum1x10E-10 Torr
HV, High vacuum1x10E-8 Torr
Temperature Range 
Feedthrough250°C
Flange, Conflat®450°C
Flange, ISO150°C
Connector / Cable, Air80°C
Connector / Cable, UHV PEEK250°C
Thermal Gradient, Maximum25°C/minute
Notes 
  1. Electrical ratings are maximum test values, with feedthrough's vacuum side at ≤ 1x10E-4 Torr. Feedthroughs are intended for instrumentation applications carrying low level signal voltage and current.
  2. For proper heat dissipation, a maximum of 20% of the pins on a feedthrough may carry the maximum pin current at any given time.
  3. PEEK is a polyether ether ketone thermoplastic.
  4. Overall assembly ratings must be adjusted to that of its lowest rated component.