Crimp Tool, Type-T1 Contacts
Crimping tool for standard and high duty cycle (sleeved) male and female contacts. Note that contacts are not included with tool, and must be purchased separately.
Used with AG contact numbers...
100170, 100171, 100180, 100181, 110908, 110909,
100980, 100981, 100990, 100991, 111323, 111324.
| Model Number: | DCT-1 |
This Crimp Tool Positioner converts the DCT-1 to a DCT-2 crimp tool.
110908 — 20-24 AWG wire diameter, female contacts with stainless steel sleeve
110909 — 26-30 AWG wire diameter, female contacts with stainless steel sleeve (see 'option' on detail page)
10 per package — High duty connect/disconnect cycles (3+ cycles per day)
Chromel® Contacts... Positive (+) leg of ANSI Type-K and E thermocouples. Sold in packs of 5.
Alumel® Contacts... Negative (-) leg of ANSI Type-K Thermocouples. Sold in packs of 5.
Chromel Pin (Male) Contacts (Non-Magnetic).5 per package.
Alumel Pin (Male) Contacts (Magnetic). 5 per package.
Coaxial Socket, unassembled with internal socket. Used for In-Vacuum PEEK connectors and air service composite connectors. Two crimp tools are needed to install this coax socket: PN - 100908, and 100190.
Coaxial (male) contact, unassembled with internal pin. Two crimp tools are needed to install this coax socket: PN - 100908, and 100190.