PEEK Cable / Zip Ties - 3.9" Long
Part Number: 111156
PEEK cable ties, 0.87" max bundle diameter, 3.9" long, 0.098" wide.10 per package.
$52.00
PEEK and Stainless Steel Cable Ties
Stainless Steel Cable / Zip Ties
Part Number: 111150
Stainless Steel cable ties, 1" to 2.7" max bundle diameter. 5",7.9", and 10.2" lengths available here, 0.18" wide.
10 per package.
$49.00
Stainless Steel Cable Mount - Two Way
Part Number: 111151
Stainless Steel cable 2 way mount, 304 SS, 0.17" mounting hole. Great for use with PEEK and SS cable ties listed above.
5 per package.
$65.00
Stainless Steel Cable Mount - Folded
Part Number: 111152
Stainless Steel cable 1 way folded mount, 304 SS, 0.28" mounting hole. Great for use with PEEK and SS cable ties listed above.
5 per package.
$31.00
PEEK Mount - (Polyether ether ketone)
Part Number: 111158
PEEK cable mount, #8 or M4 screw mounting hole. Great for use with PEEK cable ties listed above.
5 per package.
$39.00
PEEK Spacer - (Polyether ether ketone)
Part Number: 111159
PEEK cable tie spacer, 0.57 L x 0.32 W x 0.32 H, should be used with cable ties PN-111155, 111156, and 111157 at intervals of not greater than 8 inches to maintain proper separation between wires.
5/pkg.
$47.00
PEEK Cable / Zip Tie - Installation Tool
Part Number: 111154
PEEK cable tie tool. Automatically tensions and cuts off tie when pre-determined tension is reached. Used for PN - 111155.
$402.00
Stainless Steel Cable / Zip Tie - Installation Tool
Part Number: 111153
Stainless Steel cable tie tool. Automatically tensions and cuts off tie when predetermined tension is reached. Used for PN - 111150.
$1,149.00
PEEK Zip/Cable Ties, Stainless Steel Zip/Cable Ties
PEEK (polyetheretherketone) Cable/Equipment Ties are ideal for ultrahigh vacuum, high temperature, and harsh chemical environments. PEEK cable ties are rated to 250°C and 1 x 10-10 Torr. The uses for these PEEK cable ties are virtually unlimited.
Stainless Steel Cable/Equipment Ties
are also ideally suited for ultrahigh vacuum, high temperature, and harsh chemical environments. SS ties are rated to 538°C and 1 x 10-11 Torr. SS ties have a much greater loop tensile strength than PEEK and are constructed with fully rounded edges and smooth surfaces to protect cables and/or equipment.
Stainless Steel and PEEK Mounts
Mounts allow stainless steel and PEEK ties to be inserted from either of two sides, providing a low profile attachment for minimum space requirements. Mount using Vented Screws or using Torr Seal.
The Accu-Glass Products' line of ergonomic Cable Tie Installation Tools has a lightweight design to speed installation and reduce repetitive stress injuries. These installation tools provide a flush tie cut off, "eliminating sharp edges that could cut into adjacent wire bundles."